MICRONTECH KILEWS ELECTRIC SCREWDRIVER CONTROLLER INPUT AND OUTPUT SIGNALS

 

MICRONTECH KILEWS ELECTRIC SCREWDRIVER CONTROLLER INPUT AND OUTPUT SIGNALS

Microntech Kilews Electric Screwdriver controller has six input pins and six output pins. It also includes 24VDC power to run an outside device like sensors, Tower lamps etc. we get 24VDC power from pin 1 and 14, pin 1 is +24V, and pin 14 is 0V. Inputs include reset, channel selection, tool enables, tool disable, etc. and output includes OK NG OKALL signals. Input signals work by shorting between two points like Reset is assigned on two pins like CN1 and CN2, when we short these two pins it will reset the controller. Each output signals has its own COM point like if OK is assigned on CN6 then CN6 has a COM pin CN5 then if we give any signal on CN5 and the OK signal will come then it will come by CN6.

All the input and output have relays inside the controllers for each point, only they will work differently for input and output. We can completely make a process full proof by Microntech Kilews Electric Screwdriver controller Input and output signals. We can make tool disable until the application has not come when the application comes to a tool will automatically enable by getting the enable signal from a sensor fitted near the application and after tightening all the screws it will get disabled again by giving OKALL signal to conveyor or PLC, it will not count the NG tightenings. So Microntech Kilews Electric Screwdriver is very efficient which gives us quality tightening and completely error-free process.

Microntech is the biggest supplier of KILEWS ELECTRIC SCREWDRIVER SOLUTIONS in India. With the experience of over 30 Years in the assembly industry, Microntech is committed to its fast and perfect services, customers know them for their reliable work from many years in Industry. They have many branches in all over India, located in more than 10 cities in India. So we can get all the products of Kilews through Microntech with a commitment to high reliability and on-time service.Kilews products have a very wide range consisting of screwfeeders , torque meters, reaction arms, etc. To get more information about estic products or other unique global assembly solutions to contact microntech by emailing at sales@microntechgroup.com or visit website www.microntechgroup.com